Відео

How are the poles configured in the neo magnet...? How many poles dose it have..?

I tested this with 2 headed nails and a ceramic magnet and it works as a oneway gate mostly because the neos are very strong and can push the magnetic field out to the end of the nails but mine only went a little past the nails. Thank you Raymondslab for this major contribution. Norman

😂 болтушка

“Over unity” as in “free energy”. Sorry but this is bad science, and a total nonsensical misunderstanding of forces. You have to move the flapper back to “reset” it as you say. And that requires force. The “second story magnetics” as you call it, is just two magnets in opposite orientations being attracted at the center. That’s why your flapper will go toward the base magnet in your setup, but then will move away from it if you reverse the orientation of the flapper magnet. It’s not a tiered forces built like stories of a building. The magnets stick together side to side if you have them oriented oppositely. “Over unity” is a term used to avoid the term “free energy” which is not real. And “rays offset magnet principle” isn’t a real principle. It’s a consequence of the orientation of forces already explained in the basic principles of magnetics.

I love how you slip the nonferrous metallic ball in there like is the same ball. Pretty sneaky 😂

Is this an attempt to get more work "out" than you put "in" ?? Using the power of permanent magnets . I enjoy the style of video Or is this more for fun ?

You are AWESOME Ray! It's men like you who have always pioneered our future and funded our increased abundance with your will to explore and discover. Love you brother!

Thank you. My Chanel is dedicated mostly to the examination of various approaches to the principles found in this device.

So how did you do the second trick? :)

Hello, this experiment may interest you? - ua-cam.com/video/kqp1pUEnrpw/v-deo.htmlsi=haMeXPIts6AX8Qr5

❤

Hello again. Nice video. Are the construction requirements very tight to make these things? Also, I suppose it does not matter that the axle shaft of the flapper is iron or aluminum it is not crucial ?

Thanks for sharing. Will be watching for more.. 🙂

Hi Ray, someone is doing something very similar by looping the magnetic field with iron bars. Very interesting. ua-cam.com/video/7sXmD5dm8S8/v-deo.htmlsi=ghOPJc8xrfqBw3U5

Hi, Thanks for a very interesting series, again. I am wondering if you push the scale 1/2" from the pivot point on the long arm would the input measure differently? My thinking is that you are pushing the flipper magnet not far from its pivot point, maybe 1/2", and you are pushing the long bar far from it's pivot point and a greater travel distance, so leverage is what came to mind. I hope that makes sense.

Dear Raymond. Thanks for that series of videos. Very good experiments and very good teaching ! We are waiting for the next steps. Now that you understand how to perform the overunity and as you are a smart investigator... I'm sure that you will continue to impress us. ❤

❤

I like what I see😁 Thank you for being open and sharing. This is what matters in this world if we are to advance humanity. Thank You Raymond.

Ray, could you please hold your phone sideways/landscape so the video doesn't display in a vertical strip? I appreciate you, thank you.

Отличная конструкция! Результаты ещё лучше. Спасибо!

❤

April fools???

Dear Raymond. Thank you a lot for sharing your investigations. You are a great experimenter. Nevertheless would it be possible for you to measure the force applied to the trigger magnet at its extremity and not too close from the axis ? I think you are right when you speak about "over unity". You already showed some other demonstrations with magnets placed at 45 degrees the one from each other. It produces a torque force instead of a linear translation force. I think your previous experiments were more demonstratives. If i may, I would suggest going back to the Ray's Magnetic Field Shaping Generator. Please continue to share. It is always a pleasure to see your trials. Have a great day

Once again you're measuring the flapper magnet at the shortest leverage point then you're measuring the long magnet at The furthest leverage point taking advantage of leverage again as last video. To make it apples to apples you need to measure the flapper magnet at the furthest point not the shortest point from the drive shaft. Good work I love your way you think outside the box especially your older videos

Slow the video down at 5:02 and the wheels appear to spin like they are trying to propel the car forwards, like its a 'pull-back' toy car.

I want to believe more out than in but I found a flaw in this measurement. Problem is you're using leverage and a longer distance to disengage taking advantage of gearing leverage of 50grams over a longer distance of time. Whether that would total 180 grams of coins over a shorter distance .I don't know if there is any advantage you're just using gearing when you think about it. I believe it is possible to get more energy out of magnets just not sure if about this design

Looking at this before 6am with blurry eyes but is interesting setup. Will rewatch when more awake. I have thought of getting big magnets but they are so dangerous to use. Strongest I have is 1x2 inch cubes and they are hard to work with at that size. Progress on my new garage/lab I am trying to get set up is progressing super slow. I would tinker with things now but all my small parts to do anything with are buried in boxes stored in other garage, attic and basement. Takes hours to do the smallest thing because I spend hours moving boxes, searching through them and returning to try making something. By then my drive is pretty much shot. I want it all in labeled containers on shelves along the walls so I just walk to what I need and get on with it. I turned 69 March 7th. Still see well without glasses and still mobile but grunt a lot getting up from a chair. I am afraid by the time I get lab setup, I will have lost more mobility and vision. Anyway, thanks for another great video and I wish you luck on efforts. 🙂

❤

You need to think of magnets like they're hills. You can't go down the hill until you go up the hill. It takes energy to go up the hill. There's no way around it. The best that you can do in any situation with a magnet is equilibrium.

Ray I feel for you. I think you should find a local university and study physics before you attempt this. Or perhaps have the students in the lab try to assist you in creating such a device. Physics and magnetism are wonderful. It doesn’t seem like you have very much time left, I would hate to see it wasted on a fruitless endeavor

Hello Sir Ray, I would like to help in your endeavour and see if there's something in there or not. I can help you with EM simulations. Also, are you familiar with the legendary Howard Johnsons permanent magnet motor? I say legendary since nobody could verify the claims / replicate, as far as I am aware it remains as a myth, obviously that's not how science is done. I could help you with computer simulations, with the idea to verify your claims, yet I need precise CAD data / movement path of the objects involved and so on.

❤

Interesting as always.. Seems a person would need a varitity of magnet shapes to test in different ways although I can see you use steel and attach magnets to different shapes . Having both would be great for experiments. Do you buy all your magnets from same place? Of course, many can be got from old hard drives , junk speakers , toys, ect. I always jump on grabbing up things like printers that quit. Lots of little things in them. Gears and motors , mirrors , steel rods that are precise. And that is just a printer. My older son works at an Illinois University and I asked him the other day to find the waste bin there and see what goodies they may have thrown out. Sometimes minor damage is enough for them to pitch stuff and I could use them in some way. Anyway, keep that mind of yours churning for us.. 😊

I love your methodology, if I had money I would throw it at you!

We missed you Ray!

don't stress a reply for this because you likely already know, but just in case you didn't Increasing the electrical load will increase the resistance it takes to turn the generator Sorry if you did already know! Maybe I'm just silly but it felt a bit weird with how you were measuring the force required with such a small load. Fair enough if I missed the point! Maybe a fun fact that probably wont help in the slightest, but apparently if you hold a rod of iron (something like) 60 or 70 degrees north, and smack it on the end with a hammer, it will become a magnet (albeit a weak one, but it could depend on the force of the hit).

Excellent work Ray!

Great to see you back. Always interesting stuff. Food for thought.. / I save all videos for rewatch, in case your channel ever disappears for some reason. I am slowly getting closer to a set up in 12x24 foot garage I bought 2 years ago and now moved it to new place we moved to. 98% of my stuff is at the new house, scattered all about in attic, garage that came with the house and some in the new garage. I need to wire it and insulate. I keep getting ideas to play around with but when I need the parts, I have to dig for hours. Takes all the caring to do it out of me. Your not on very often but when I see you put up a video, it makes my day. I dont need all the flashy videos many do, just the nitty gritty substance of the subject. That is my thoughts on it anyway. Take care and I hope you can put out another video soon. 🙂

you have a wonderful mind, and creative uses and manipulations of magnetic fields, the likes of which I have not seen since Howard Johnson

❤

If you added steel washers on top of the magnet it would make an AC waveform larger

Looks like something for NASA.

The heat!

I will gladly buy you several large coffees if you can reveal the part number/source of the large double sided piezo transducers, thanks.

❤💥👍

thsi reminds me of the crystaö batteries of marcus reid, what are these alements, and where can i get them? where did you got them from? thanks and keep it up!

What are these Exactly? Can you pleae make a diy video how to relicate? thank you keep up the great work!

Try to put a bunch of them on a ferris wheel connected to a motor rotating the devices against a carpet. See if the static charge could charge them enough to power the motor to turn the ferris wheel against the carpet.

Maybe you could try it with the piezo elements perpendicular to a strong magnetic pole? Or sit the flat piezo on top of a pin cushion of needles or sharp pins?

Beware there are Clowns on youtube messaging Serious people about violating laws of physics . As if anyone is violating anything ? hu?